Automatic Gates VIP Security staff have been associated with Magnetic Automation Gates and Barrier Arm products for over 16 years. We are proud to be agents for Magnetic Automation Technologies (who are based in Auckland). The Magnetic Automation range of products is well respected around NZ and the Pacific for reliability and functionality. VIP Security staff' have been trained by the factory in the installation of the Magnetic Automation Cantilever gates and PBAU series barrier arms. This allows our team to install these systems to the same high standards as would be expected from New Zealands premier gate and barrier company. Our experience with Magnetic Automation products cover the following product ranges... Magnetic Automation Cantilever Gates Cantilever gates are designed for high use, rapid travel situations where total reliability is essential. The design contains all operating forces within a portal frame and balancing rail. An in ground track is not required.
The gate leaf is fabricated from substantial steel rectangular hollow section with a minimum wall thickness of 6mm. It has rigidity in both the horizontal and vertical planes and consequently offers high resilience should the gate be struck.
The leaf is supported by three heavy duty rollers, one within the portal frame and the others in a trailing bogie which traverses the horizontal balancing rail.
The portal frame also uses substantial rectangular hollow section, which provides vertical and lateral support for the gate leaf. A foot mounted motor enclosure with lockable weather cover mounts alongside the portal frame.
The gate may operate at a constant speed nominally 200mm/sec alternatively variable speed where soft start/stop sequences are separated by rapid travel between. Due to high inertia of the gate leaf a maximum speed of 600mm/sec is recommended. The variable speed is accomplished using a PLC and inverter frequency control.
The simplified portal gate offers a fantastic compromise between the full portal cantilever gate and price. VIP Security have installed many of these gates in busy industrial sites around Christchurch to great success. The main features of these gates are as follows…
Feature | Benefit | - Three phase frequency controlled inverter
- Cantilever design
- RHS (Rectangular Hollow Steel) construction
- Magnetic Automation design and construction
- Hot zinc Galvanised coating
- Integrated Safety Loop
- Magnetic Automation design and construction
| - Allows single phase supply and variable travel speeds
- No ground track to foul or snag gate function
- Extra strong construction, more so than aluminium
- Proven design with major customers around NZ
- Durability in the face of the elements
- Provides better collision prevention
- Proven reliability, robustness and usability
|
If your complex or industrial sites require the strongest and most reliable gate possible, click here to contact us. Other Gates SystemsWe service, install and maintain as follows... - Magnetic Automation GTA series
- Magnetic Automation GSG series swing gates
| - Magnetic Automation GTA series swing gates Magnetic Automation "Hyppo" series swing gates
|
|
